Plasma Cutting Machine
• Brief introduction
Our plasma cutting machines take advantages of both in home and abroad and strictly meet the requirement of our customers. The frame is steady due to the use of steel welding (80×80×6mm). The high precision rails (in x- axes and y- axes) are all imported from South Korea. The error between the two rails in x- axes is less than ±0.05 mm, and the uprightness error between x- axes and y- axes is less than ±0.05. The machining speed is from 1 to 26.4 meters per minute. It ensures the cutting quality.
•Technology data
1£®Computer system
2£®Table-board
2.1 Penetrate capability: 0.4-4mm
2.2 Max supporting value: 600kg
2.3 Cutting speed: 1-26.4 meters/min
2.4 Max orienting speed: 26.4 meters/min
2.5 Max Size:
2.5.1PC-3100:1250mm x 3100 mm
2.5.2PCD-3100:1550mm x 3100 mm
2.5.3PC-5100: 1550mm x 5100 mm
3£®Power requirement
3.1 power supply: 380 volts three-phase or 220 volts three-phase, 4 A alternating current
3.2 voltage generator:220-380V volts, 20-60A alternating current
3.3 power:40—120KW
4£®Gas source requirement
flux:320 cf/hour(0.15 cm/min)
compressive stress:0.6-0.9Pa,dryness, no oil
5£®Machine size
5.1PC-3100:4160×1810×1180mm
5.2PCD-3100:4160×2100×1180mm
5.3PC-5100:6160×2100×1180mm
• Scheme
1ӢControl system
1.1 mainframe unit
a) Mainframe
b) CPU
c) Numerical control interface card
d) input/output interface card
2ӢDrive system
The drive system is imported from Mitsubishi (Japan) with good heat dispersion, less fault, high resolving power in coder (4 times compared with medium-sized). It ensures the cutting quality.
2.1 Mitsubishi E
X- axes:servo amplifier:MR-E-100A servo motor:HC-SFE102 Y- axes:servo amplifier:MR-E-70A servo motor:HC-SFE52
2.2 Mitsubishi J2S
X- axes:servo amplifier:MR-J2S-100A servo motor:HF-SE102 Y- axes:servo amplifier:MR-J2S-60A servo motor:HF-SE52
3Ӣautomatic regulatory height systems
3.1 capacitance series
3.2 arc press series
4Ӣair passage system
It is made from steady pneumatic reversing valve and magnetic pneumatic cylinder.
5Ӣcutting generator
We imported plasma generator from Hypertherm (USA).It performances steady and ensures the cutting quality.
Plasma Cutting Machine product offered by
Jiangyin Jack-aiva Trade Co.,Ltd
